Influence of Graphite Type on the Properties of Al²O³-SiC-C Castables 381

Ziya Aslanoğlu

Superates Refractory Inc. Maslak Mah. Maslak Ayazağa Cad. No:9 34398 Sarıyer/Istanbul, Turkey


Investigation of the Effect of Silicon Carbide Additive on Mechanical and Thermal Properties of Alumina Silicate Refractories 386

Bora Yay, H. Çağdaş Karakuş, Erhan Akıncı

CMS Jant ve Makina Sanayi A.Ş. Mustafa Kemal Atatürk Bulvarı No:53 A.O.S.B Çiğli/İzmir


MgO C Tuğlalarda Antioksidan Kaynağı Olarak Kullanılan Al, Mg, Si, Mg-Al Alaşımları ve Bunların Kombinasyonlarının Koklaşma Sonrası Özelliklere, Oksidasyon Davranışına ve Hidratasyon Direncine Etkisi 390

Görkem Yanık , Ozan Uylas, Özkan Kurukavak, Nafiz Özdemir, Yakup Yalçınkaya

Kütahya Manyezit Sanayi A.Ş. Kütahya, Turkey


Nanoceramic Dispersion Strengthened 316L Stainless Steels: Structural and Mechanical Properties 395

Csaba Balázsi

Hungarian Academy of Sciences - Hungarian


Performance of Solid SiAlON Milling Tools Doped With Different Rare Earth Elements on High Speed Milling of Inconel 718 396

Ali Çelik¹, Melike Sert Alağaç², Alpagut Kara³, Servet Turan³, Ferhat Kara³

¹Bilecik Şeyh Edebali University, Department of Metallurgical and Materials Engineering, Bilecik, Turkey

²Alp Aviation Co., Eskişehir, Turkey

³Anadolu University, Department of Materials Science and Engineering, Eskişehir, Turkey


The Effects of Phase Diversity on the Optical Properties of SiAlON Ceramics 400

Suna Avcıoğlu¹, Semra Kurama²,³

¹Ondokuz Mayıs University, Faculty of Engineering, Department of Materials Science and Engineering,
Kurupelit Campus, 55139 Atakum / SAMSUN

²Anadolu University, Faculty of Engineering, Department of Materials Science and Engineering, Iki Eylul Campus, 26555, Eskisehir/TURKEY

³Anadolu University, Faculty of Aeronautics and Astronautics, Iki Eylul Campus, 26555, Eskisehir/TURKEY


Effect of Zircon and Y²O³ Addition on the Sintering and Mechanical Behaviour of In-Situ Formed Spinel-Mullite-Corondum Ceramic Composites 404

Neslihan Başaran, Gökhan Tuğyanoğlu, Ahmet Çapoğlu

Gebze Technical University, Faculty of Engineering, Department of Materials Science and Engineering, Istanbul, Turkey


The Effects of a Newly Developed Binder System on the Slag Corrosion Behavior and Thermal Shock Resistance of an Alumina Based Cement Free Castable 408

Melis Oktay¹, Serdar Özgen²

¹Metamin A.Ş., Istanbul, Turkey

²Istanbul Technical University, Faculty of Chemical and Metallurgical Engineering,
Department of Metallurgical and Materials Engineering,
Istanbul, Turkey


Tribological Properties of a Porous Sodium Borosilicate Glass 412

Emre Burak Ertuş¹,², Çekdar Vakıfahmetoğlu³, Abdullah Öztürk¹

¹Middle East Technical University, Department of Metallurgical and Materials Engineering, Ankara, Turkey

²KTO Karatay University, Department of Metallurgical and Materials Engineering, Konya, Turkey

³İzmir Institute of Technology, Department of Materials Science and Engineering, İzmir, Turkey


Production of Photocatalytically Active TiO²-P²O5 Glasses by the Sol-Gel Process 416

Yiğit Cansın Öztürk¹, Asmae Bouziani¹, Mert Efe¹, Jongee Park², Volkan Kalem³, Abdullah Öztürk¹

¹Middle East Technical University, Department of Metallurgical and Materials Engineering, 06800, Ankara, Turkey

²Atılım University, Department of Metallurgical and Materials Engineering, 06836, Ankara, Turkey

³Selçuk University, Department of Metallurgical and Materials Engineering, Selçuklu, 42130, Konya, Turkey


Production and Development of AlON Ceramics with Various Additives by Reactive Spark Plasma Sintering 420

Müfit Kaçar, Sefa Mert Semerciöz, Mert Atay, Ahmet Hakan Güler, Demet Aydoğmuş, Barış Yavaş,
İpek Akın Karadayı, Gültekin Göller, Onuralp Yücel, Filiz Şahin

Istanbul Technical University, Faculty of Chemical and Metallurgical Engineering,
Department of Metallurgical and Materials Engineering,
Istanbul, Turkey


Effect of Eu3+ and Tb+3 Doping Content on Optical Properties of Lu²O³ Produced for Scintillation Applications 424

Tolga Taylı¹, Behiye Yüksel², Gökhan Orhan¹, Berk Alkan³, Ahmet Umut Söyler4, Kadri Vefa Ezirmik5

¹Istanbul University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, İstanbul, Turkey

²Istanbul Aydın University, Faculty of Engineering, Deparment of Mechanical Engineering, İstanbul, Turkey

³Istanbul Technical University, Faculty of Chemical and Metallurgical Engineering, İstanbul, Turkey

4Teta Glass Technologies, İstanbul, Turkey

5Atatürk University, Faculty of Engineering, Deparment of Metallurgical and Materials Engineering, Erzurum, Turkey


Application of Two-Stepped Ion Exchange on Soda Lime Glass for Mechanical Improvement 428

Süheyla Aydın, Duygu Güldiren, İpek Erdem

Istanbul Technical University, Turkey


The Effect of Annealing Time Period on the Internal Stress of the Artistic Glasses 429

Göktuğ Günkaya, Ecem Yılmaz

Anadolu University, Faculty of Fine Arts, Department of Glass, 26470, Eskisehir, Turkey


Transparent Glazes with Basalt Addition 433

Elif Eren Gültekin

Selçuk University, School of Civil Aviation, Department of Airframe and Powerplant Maintenance, Konya, Turkey


Optimizing the Migration Behavior of Enamel Coatings Used as Food Contact Materials 437

Kağan Benzeşik¹, Meltem İpekçi¹, Alper Yeşilçubuk², Filiz Çınar Şahin¹, Onuralp Yücel¹

¹Istanbul Technical University, Faculty of Chemistry and Metallurgy, Metallurgical and Materials Eng. Dep., 34469, İstanbul, Turkey

²Arçelik A.Ş. Central R&D, 34950, İstanbul, Turkey


SiOC Ceramic for Water Purification 441

Damla Zeydanlı¹, Çekdar Vakıfahmetoğlu²

¹Department of Chemistry, Istanbul Technical University, 34469, Istanbul, Turkey

²Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, Urla, Izmir, Turkey.


Investigations on Alternative Matrix Materials Towards the Efficiency of SiC Formation in C/SiC Ceramic Composites 446

Simge Tülbez¹, Ziya Esen², Arcan F. Dericioğlu¹

¹Middle East Technical University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Ankara, TURKEY

²Çankaya University, Faculty of Engineering, Department of Material Science and Engineering, Ankara, TURKEY


Synthesis of High Purity Boron Carbide Powders via Sol-Gel Method 450

Suna Avcıoğlu¹,², Figen Kaya², Cengiz Kaya³

¹Ondokuz Mayıs University, Faculty of Engineering, Department of Materials Science and Engineering, Kurupelit Campus, 55139, Samsun/TURKEY

²Yıldız Technical University, Faculty of Chemistry and Metallurgy, Department of Metallurgical and Materials Engineering,
Davutpasa Campus, 34210, İstanbul/TURKEY

³Sabanci University, Faculty of Engineering and Natural Sciences, Materials Science and Nano Engineering, Istanbul, Turkey

4Sabanci University, Nanotechnology Research and Application Centre (SUNUM), Istanbul, Turkey


Effect of GNP-CNT (GNT) Addition on Properties of ZRC-TIC Composites Prepared by Spark Plasma Sintering 454

Burak Çağrı Ocak, Barış Yavaş, İpek Akın, Onuralp Yücel, Filiz Şahin, Gültekin Göller

Istanbul Technical University, Faculty of Chemistry and Metallurgy, Metallurgical and Materials Eng. Dep., 34469, İstanbul, Turkey


Investigation the Oxidation Resistance of TZM Alloy Prepared by Spark Plasma Sintering Method 458

Barış Yavaş, İpek Akın, Onuralp Yücel, Filiz Şahin, Gültekin Göller

Istanbul Technical University, Faculty of Chemistry and Metallurgy, Metallurgical and Materials Eng. Dep., 34469, İstanbul, Turkey


Reactive Spark Plasma Sintering of TaB² Ceramics 462

Melis Kaplan, Onuralp Yücel, Filiz Şahin, Gültekin Göller, İpek Akın

Istanbul Technical University, Metallurgical and Materials Engineering Department, 34469, Istanbul


Mechanical Properties and Oxidation Behavior of TiB²-GNP Composites 466

Burak Çağrı Ocak, Filiz Çınar Şahin, Gültekin Göller, İpek Akın

Istanbul Technical University, Faculty of Chemistry and Metallurgy, Metallurgical and Materials Eng. Dep., 34469, İstanbul


High-Frequency Induction Heating Sintering of Electrospray Deposited La²Mo²O9 470

Suna Avcıoğlu¹, Tuğba Mutuk¹, Mevlüt Gürbüz², Sinem Çevik¹

¹Ondokuz Mayıs University, Faculty of Engineering, Department of Materials Science and Engineering,
Kurupelit Campus, 55139 Atakum / SAMSUN

²Ondokuz Mayıs University, Faculty of Engineering, Department of Mechanical Engineering, Kurupelit Campus, 55139 Atakum / SAMSUN


Investigation of Li Addition on Physical and Electrical Properties of KNN Ceramics via Spark Plasma Sintering 474

Mehmet Kahraman Özmen, Barış Yavaş, İpek Akın, Onuralp Yücel, Filiz Şahin, Gültekin Göller

Istanbul Technical University, Faculty of Chemistry and Metallurgy, Metallurgical and Materials Eng. Dep., 34469, İstanbul


Development of Piezoelectric (K1-xNax)NbO³ Ceramics: The Route to High Quality Ceramics Through Process Optimization 478

Hansu Birol

ASELSAN A.Ş., Konya Yolu 8. Km, Oğulbey Mah. 3051. Sok. No:3, 06830, Ankara, Turkey


Dielectric Property-Microstructure Relation in Magnesium Calcium Titanate Ceramics 483

Merve Ergin¹,³, Özgür Birer³, Nuri Solak², Abdullah Öztürk¹

¹Metallurgical and Materials Engineering, Middle East Technical University

²Metallurgical and Materials Engineering, Istanbul Technical University

³ASELSAN A.Ş Radar and Electronic Warfare Business Sector


The Effects of Mechanical Activation on Microstructural Properties of Zirconium Doped (Na0.5Bi0.5)TiO³ Ceramics 487

Derya Kırsever, Hüseyin Özkan Toplan

Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, 54187, Esentepe, Sakarya, Turkey


Mechanical and Microstructural Evolution of Solid Graphite Rocket Nozzle Throats in Extreme Temperature and Pressure Conditions 490

Burçin Kaygusuz¹, Barış Nigar²,³, Levent Ünlüsoy³, Demirkan Çöker4, Sezer Özerinç¹,²

¹Middle East Technical University, Department of Micro and Nanotechnology, Ankara, Turkey

²Middle East Technical University, Department of Mechanical Engineering, Ankara, Turkey

³Roketsan Missile Industries Inc., Ankara, Turkey

4Middle East Technical University, Department of Aerospace Engineering, Ankara, Turkey


Development of ZrB² Reinforced Eutectic Ceramics 494

Öykü Kurulgan, Kübra Gürcan, Erhan Ayas

Department of Material Science and Engineering, Anadolu University, Eskisehir


Comparative Study of CMAS and Hot Corrosion Behaviour of Single Layered and Functionally Graded Thermal Barrier Coatings 498

Fatih Kırbıyık, Gültekin Göller

Istanbul Technical University, Faculty of Chemistry and Metallurgy, Metallurgical and Materials Eng. Dep., 34469, İstanbul, Turkey


Effect of CMAS on Thermal Shock Performance of Plasma Sprayed YSZ TBCS 502

Emre Bal¹, Muhammet Karabaş², Yılmaz Taptık¹

¹Department of Metallurgical and Materials Engineering, Istanbul Technical University, İstanbul, Turkey

²Hakkari University, Faculty of Engineering, Department of Materials Science and Engineering, Hakkari,Turkey


Effect of Citric Acid Ratio on the Synthesis of Tungsten Trioxide by Solution Combustion Route 506

Ş. Samet Kaplan, M. Şeref Sönmez

Istanbul Technical University, Faculty of Chemical and Metallurgical Engineering,
Department of Metallurgical and Materials Engineering,
Istanbul, Turkey


Formation Mechanism of Strontium Cobaltite from Equimolar Mixture of Co(NO³)².6H²O and Sr(NO³)² in Ar Atmosphere 510

Cemal Aslan, Ahmet Orkun Kalpaklı, Sedat İlhan, Cem Kahruman, İbrahim Yusufoğlu

Istanbul University, Engineering Faculty, Metallurgical and Materials Engineering Department, 34320, Avcilar, Istanbul, Turkey


Synthesis of Manganese Doped Zinc Oxide Nanofibers by Electrospinning Method and Investigation of the Photocatalytic Activities 514

Elif Baylan¹,², Özlem Altıntaş Yıldırım¹,²

¹Selcuk University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Konya, Turkey

²Konya Technical University, Faculty of Engineering and Natural Sciences,
Department of Metallurgical and Materials Engineering,
Konya, Turkey


Synthesis of Ceramic Materials in Ti-B-N-Me and Ti-B-N-C-Me Systems 518

G. Oniashvili, Z. Aslamazashvili, G. Tavadze, G. Zakharov

F. Tavadze Institute of Metallurgy and Materials Science, 15 Al. Kazbegi ave., Tbilisi, 0160, Georgia


Production and Characterization of ZnO Doped Yttria Stabilized Zirconia Ceramic Blocks 522

Bektaş Taha Altıparmak¹, Asmae Bouziani¹, Jongee Park², Abdullah Öztürk¹

¹Middle East Technical University, Department of Metallurgical and Materials Engineering, 06800, Ankara,Turkey

²Atılım University, Department of Metallurgical and Materials Engineering, 06836, Ankara,Turkey


Advantages of Steel Production Quality/Cost and Operational Mechanisms with Dolomite Bricks in Steel Laddle 526

Barış Genç, Erzen Erez, Yasin Genç

Haznedar Refrakter San. A.Ş.


Microstructural Investigation of Sol-Gel Derived Seeded Alumina Powders 534

Bediha Orbay, Azade Yelten Yılmaz, Suat Yılmaz

Istanbul University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, 34320, Avcılar, Istanbul, Turkey


Effect of SrO Adition on CaO, MgO, SiO² and Al²O³ (CMAS) Glass-Ceramic System 537

Utku Kıvanç Kurtkapmaz, Hüseyin Özkan Toplan, Nil Toplan

Sakarya University, Engineering Faculty, Metallurgical and Materials Engineering Departmant, Esentepe Campus, 54186 Sakarya, Turkey


Comparison Effect of Production Methods on Corrosion Behaviour of CAS Based Glass-Ceramics 541

Zafer Yavuz Merkit¹, Bahadır Aydın², Nil Toplan¹

¹Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering, Turkey

²İstanbul University-Cerrahpaşa, Faculty of Engineering, Department of Engineering Sciences, 34320, İstanbul, Turkey


Structural Characterization of Fe5W³B² Powder Metallurgy Alloy 545

Mustafa Durmaz, Uğur Şen, Şaduman Şen

Sakarya University, Faculty of Engineering, Department of Metallurgical and Materials Engineering,
Esentepe Campus, TR-54187,
Sakarya, Turkey


Synthesis of Metal Borides Powders in Combustion Mode 549

Aizhan Seidualiyeva, Kaster Kamunur, Roza Abdulkarimova

Al-Farabi Kazakh National University, Kazakhstan

Bildiriler Kitabı yayınlandı. Kapsamlı bilgi için tıklayın...